增材制造技术在超高膨胀封隔器中的应用

石油和天然气行业不断关注增材制造技术在航空航天和汽车行业的应用发展。研发了利用增材制造技术的超高膨胀封隔器,该封隔器的支承环系统由增材制造。增材制造设计大幅减少了支承系统的构件数量,同时显著提高了膨胀能力和额定压力。密封元件系统与增材制造支承环安装在一起,提供了极端膨胀比、零挤压间隙和对不规则孔的良好适应性。分析和测试结果表明:直径膨胀比高达111%,与常规封隔器相比,提高50%以上; 至少涵盖5种线重的套管(外径相同); 在148.89 ℃的温度下,密封元件能够保持压力68.95 MPa。介绍了增材制造技术、增材制造支承环概念、增材制造材料力学性能、密封元件系统优化和测试情况,以期给我国的完井作业提供借鉴。     

水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

100 MeV质子回旋加速器二期辐照效应管道设计

针对中国原子能科学研究院100 MeV质子回旋加速器上的单粒子效应辐照装置进行了二期管道设计，采用八极磁铁校正法对束流进行了扩束及均匀化，最终在靶上得到了一个30 cm×30 cm、均匀性好于92%的均匀分布的束斑，满足了单粒子效应实验的需求。为降低靶站处的束流能散及中子本底，采用两级降能的方案，在偏转磁铁前放置1个降能片，将能量分为100 MeV和40 MeV两档，并分别针对这两个能量点进行方案设计，束流利用率均在42%以上。公差分析结果表明，四极磁铁对靶上束斑均匀性的影响大于八极磁铁，安装过程中应优先保证四极磁铁的安装公差。     

A new ternary phase in the system CaO–Al2O3–Cr2O3: Crystal structure and thermal expansion of CaAl2Cr2O7

Polycrystalline material of a novel phase in the system CaO–Al₂O₃–Cr₂O₃ has been obtained by solid-state reactions. Chemical analysis indicated the composition CaAl₂Cr₂O₇. Single-crystal growth of the new compound using borax as a mineralizer was successful. Diffraction experiments at ambient conditions on a crystal with composition CaAl_2.13Cr_1.87O₇ yielded the following basic crystallographic data: space group P 3, a = 7.7690(5) Å, c = 7.6463(5) Å, V = 399.68(6) ų, Z = 3. Structure determination and subsequent least-squares refinements resulted in a residual of R(|F|) = 2.3% for 1440 independent observed reflections and 113 parameters. To the best of our knowledge, the structure of CaAl_2.13Cr_1.87O₇ or CaAl₂Cr₂O₇ represents a new structure type. It belongs to the group of double layer structures where individual double layers contain octahedrally and tetrahedrally coordinated cation positions. Linkage between neighboring sheet packages is provided by additional calcium cations. Furthermore, thermal expansion has been studied in the interval between 29 and 790°C using in situ high-temperature single-crystal diffraction. No indications for a structural phase transition were observed. From the evolution of the lattice parameters the thermal expansion tensor has been obtained. A pronounced anisotropy is evident. The response of structural building units to variable temperature has been discussed.     

基于Abaqus的双裂纹不同间距对裂纹扩展速率的研究

扩展有限元法是近年经过大量运用的,在传统有限元的范围中求解不连续问题一种有效计算方法,它是基于单位分解的思想,在计算不连续问题时加入跳跃函数。以ABAQUS为平台,基于扩展有限元方法 (XFEM),以含双穿透型裂纹的有限宽板受横向拉伸载荷为力学模型,建立相应的裂纹尖端应力的有限元模型,研究焊接接头区域不同间距双裂纹相互作用对裂纹扩展速率的影响。结果表明:双裂纹间距的的大小并没有对裂纹的扩展速率产生影响。     

基于IMCT理论的CaO-SiO2-MgO-Al2O3-Na2O渣系的脱硫热力学模型

 为了精确表征含Na2O渣系的脱硫能力，改善脱硫效果，基于熔渣离子与分子共存理论（IMCT）建立了CaO-SiO2-MgO-Al2O3-Na2O渣系结构单元的作用浓度计算模型和1 753 K时该渣系的脱硫热力学模型。并对渣系的总硫分配比及各自硫分配比的影响因素进行了讨论分析。理论结果表明，除LS， MgS外，随着Al2O3质量分数的增加，该渣系的脱硫能力明显下降，而MgO和Na2O质量分数的增加，对提高渣系的脱硫能力具有明显的促进作用。此外，少量的Na2O即可表现出很强的脱硫效果，这为含有Na2O的冶金二次资源在铁水脱硫过程中的应用以及铁水脱硫渣系的优化提供了必要的理论依据。     

基于跨语言词向量模型的蒙汉查询词扩展方法研究

跨语言信息检索指以一种语言为检索词,检索出用另一种或几种语言描述的一种信息的检索技术,是信息检索领域重要的研究方向之一。近年来,跨语言词向量为跨语言信息检索提供了良好的词向量表示,受到很多学者的关注。该文首先利用跨语言词向量模型实现汉文查询词到蒙古文查询词的映射,其次提出串联式查询扩展、串联式查询扩展过滤、交叉验证筛选过滤三种查询扩展方法对候选蒙古文查询词进行筛选和排序,最后选取上下文相关的蒙古文查询词。实验结果表明: 在蒙汉跨语言信息检索任务中引入交叉验证筛选方法对信息检索结果有很大的提升。     

Investigation of non-isothermal crystallization,dynamic mechanical and dielectric properties of poly(ether-ketone) matrix composites

ABSTRACT

Poly(ether-ketone)/hexagonal boron nitride (h-BN) composites reinforced with micrometer-sized h-BN particles were investigated. The composites exhibited glass transition temperature (T_g) and thermal stability over 160°C and 560°C, respectively. The melting point and peak crystallization temperatures of the composites decreased up to 17°C and 12°C, respectively. The linear CTE of the composites decreased both below and above the T_g. The storage modulus increased with increasing h-BN content at all temperatures (50–250°C). The composites possessed excellent dielectric properties with insignificant dispersion with increasing frequency. Thus, resultant composites are promising candidates for the printed circuit boards/electronic substrates.     

Effect of formic-acid-to-acetic-acid ratio on the structure and spinnability of aqueous aluminium sol of alumina fibre

The structure and spinnability of sol are essential for obtaining high-performance continuous alumina-based fibres. Herein, the surface electrostatic potential analysis and conventional experimental methods (X-ray diffraction, Fourier-transform infrared spectroscopy, ²⁷Al nuclear magnetic resonance solution spectra and rheological methods) were combined to investigate and discuss the relationship between the structure and spinnability of aluminium carboxylate sols with different formic-acid-to-acetic-acid molar ratios. The results showed that the aluminium carboxylate sol structure changed with the formic-acid-to-acetic-acid molar ratio and greatly affected the sol's spinnability. The tetramer (AlO6 oligomer) products comprising two effective active carboxylate groups in the sol increased with the formic acid content, which helped form linear long-chain polymers. However, excess formic acid content led to a large increase of AlO6 monomer products that were unable to form linear long-chain polymers, which decreased the sol's spinnability. When the formic-acid-to-acetic-acid molar ratio was 1.15:0.85, the sol containing more AlO6 oligomer products had the best spinnability. Furthermore, α-Al₂O₃ ceramic fibres with good morphology, small grains and uniform diameter distribution were obtained after calcination at 1200 °C.